The KanexPro VGA extender over a single CAT5e/6 cable is designed for routing high-resolution VGA signals and stereo audio over remote distances up to 1,000ft. (300m). Each receiver set features a separate gain and peaking rotary switch used in adjusting brightness and skew over long distances.

The 15-pin HD connectors are convenient and cost-effective for all input/ output connections supporting full bandwidth compatible from VGA to WUXGA graphics card resolutions and HDTV’s to projectors. In addition, each output performs a separate buffering to maintain signal integrity and reject noise interference.

Features:

• Extend high-resolution VGA signal with audio over a single Cat5E/6 cable up to 1,000 feet (300m)
• Adjust GAIN and PEAK levels to adapt for variable lengths of UTP cable on the receiver
• Supports maximum resolutions up to WUXGA (1920x1200@60Hz)
• Stereo Audio Input through 3.5mm jack
• CAT5e/6 Output via RJ-45 Jack
• Transmitter includes Local VGA Monitor Output w/ 3.5mm jack
• EDID Compliant
• Rack or under-desk mountable
• 5VDC external power supply included
• 
  Specification:
• Transmitter Input: VGA x1/3.5mm Stereo x1
• Transmitter Output: Cat 5e/6 x1/VGA Output (Local) x1/3.5mm Stereo x1
• Receiver Input: Cat 5e/6 x1
• Receiver Output: VGA x1/3.5mm Stereo x1
• Vertical Frequency Range: 60/75/85Hz
• Resolutions (PC): VGA-WUXGA (1920x1200@60Hz)
• Power Supply: 5V DC@2A, 5W
• Operating Temperature: 0°C to +70°C
• Operating Humidity: 10% to 85 % RH (no condensation)
• Storage Temperature: -10°C to +80°C
• Storage Humidity: 5% to 90 % RH (no condensation)
• Regulatory Approvals Converter: FCC, CE, UL
• Regulatory Approvals Power Supply: FCC, CE, UL
• 
  Dimensions:
• VGA Extender: 4”x2.6”x1” (102x66x25.5mm)
• Receiver: 3.25”x1.4”x0.8” (82.6x35.6x20mm)
• VGA Extender: 0.47lbs (215g)
• Receiver: 0.25lbs (115g)
• 
  Package Contents: 1 x VGA 1x1 Extender over CAT5e/6 with Audio up to 1,000ft (300m)

Panel